Zte Gpon Snmp Management

On
Zte Gpon Snmp Management 3,7/5 9375 votes

ZTE ZXA10 C300 GPON OLT provides the stable technology and service platform for full-service access and management such as HSI, VoIP, TDM, IPTV. ZTE GPON SNMP management system called Ikarus developed by OFA company. Www.zisacom.com ZTE GPON OLT C300 is chassis,support 14pcs 8port or 16port PON line card. ZISA can supply complete the C300, C320 and ONU F660.

  1. Snmp Management Console
  2. Snmp Management Tools
  3. Apc Snmp Management Card

ZTE GPON OLT SNMP Server Configure

Today i will discuss how to ZTE GPON OLT SNMP Server Configure in ZXA10 C220 & C300 series OLT.

Prerequisites:

  • Make sure that the network device works normally.
  • Log in to the ZXA10 C220 through HyperTerminal or Telnet.

Context: SNMPis essentially a request-reply protocol running over UDP
(ports 161 and 162), though TCP operation is possible. SNMP is
an asymmetric protocol, operating between a management station and an agent. The agent is the device being managed – all its software has to do is implement a few simple packet types and a generic get-or-set function on its MIB variables. The management station presents the GUI by collecting MIB data over time.

The ZXA10 C220 supports SNMP v1/v2/v3.

To configure the SNMP server, perform the following steps:

Step-1: Use the configure terminal command to enter global configuration mode.

Step-2: Use the snmp-server community command to configure SNMP community.

Step-3: Use the snmp-server location command to configure physical location information.

Step-4: Use the snmp-server enable command to configure trap type.

Snmp Management Console

Note: Trap is the unsolicited information which is sent to the NMS by a managed device . It is used to report urgent events. The ZXA10 C220 supports six types of traps: SNMP, BGP, OSPF, RMON, STALARM, and VPN.

Step-5: Use the snmp-server host command to configure SNMP server (trap destination host). Download anime gintama season 2 sub indo film.

Sonic Charge – Microtonic v3.1 – OS X [packet-dada] 13.9 MB ————————————————————————————- Microtonic (a.k.a. Sonic charge microtonic download.

Step-6: Use the show snmp config command to query SNMP configuration.

Snmp management system

Snmp Management Tools

Snmp

ZTE GPON OLT SNMP Server Configure Example:

Apc Snmp Management Card

Configure SNMP server:

  • Community: Public
  • Right: Read only
  • SNMP server host: 10.62.31.123
  • SNMP version: v2

ZXAN#configure terminal
Enter configuration commands, one per line. End with CTRL/Z.
ZXAN(config)#snmp-server community public view allview ro
ZXAN(config)#snmp-server enable trap
ZXAN(config)#snmp-server host 10.62.31.123 trap version 2c pulic enable NOTIFICATIONS server-index 1

ZXAN(config)#show snmp config
snmp-server location xxxx, yyy, Bangaldesh.
snmp-server contact +88-017-xxxxxxxx
snmp-server packetSize 3000
snmp-server engine-id 830900020300010289d64401
snmp-server community public view allview rw
snmp-server view allview internet included
snmp-server view DefaultView system included
snmp-server host 10.62.31.123 trap version 2c pulic enable NOTIFICATIONS server-index 1 udp-port 162
snmp-server enable trap SNMP
snmp-server enable trap VPN
snmp-server enable trap BGP
snmp-server enable trap OSPF
snmp-server enable trap RMON
snmp-server enable trap STALAR