1. Dsc Impassa Programming
2. Adt Impassa User Manual
3. Adt Dsc Impassa Installer Code

Dsc Impassa Programming

Adt Impassa User Manual

1. Full Name Email Phone Number Zip Code I am an ADT. System Manuals & User Guides. ICamera-1000-ADT Indoor Low-Light Camera Installation Guide OC810-ADT.
2. Adt dsc installer code. With an ADT home security system. I ask them to reset the installer. DSC Impassa 9057 is a Cellular Wireless Alarm System.

Dec 24, 2014  How do I reset the installers code for DSC Impassa 9057. 1 2 3 sofia reyes. Frigidaire air conditioner manual. Default installer code 5555 is programmed in section 006. If you don't know the code.

Adt Dsc Impassa Installer Code

• Quick Links:

Also See for DSC Impassa

Related Manuals for DSC Impassa

• Security System DSC WT4901 Installation Instructions Manual
  (32 pages)
• Security System DSC WT4989 Operating Instructions Manual
  Two-way wireless key (8 pages)
• Remote Control DSC WT4989 Operating Instructions
  (2 pages)

• Security System DSC iOtega User Manual
  Wireless security and automation system supports ws9lcdwf series; ws900-29 series; ws900-19 series; 3g7090 series; lt7090 series; ws900-28; ws901-18; ws901-24eu; ws901-14; 3g7090-eu; pg4929; pg8929; pg9929; pg4939; pg8939; pg9939; pg4949; pg8949; pg99 (34 pages)
• Security System DSC iotega Installation Manual
  (12 pages)
• Security System DSC Digital Security Control PC158O Instruction Manual
  Tyco digital security control instruction manual (19 pages)

Summary of Contents for DSC Impassa

• Page 1 Self-Contained Wireless Alarm System v1.0 User Manual WARNING: This manual contains information on limitations regarding product use and function and information on the limitations as to liability of the manufacturer. The entire manual should be carefully read..

• Page 3: Table Of Contents

  Table of Contents 1. About Your Security System 1.1 Fire Detection (must be enabled by Installer) .... . . 2 1.2 Carbon Monoxide Detection (must be enabled by Installer) .

• Page 4: Fcc Compliance Statement

  Security Controls could void your authority to use this equipment. DSC c/o APL Logistics 757 Douglas Hill Rd., Lithia Springs, GA 30122 This equipment has been tested and found to comply with the limits for a Class B Additional Information digital device, pursuant to Part 15 of the FCC Rules.
• Page 5 Always ensure you obtain the latest version of the User Guide. Updated versions of this User Guide are available by contacting your distributor. IMPORTANT SAFETY INSTRUCTIONS To reduce the risk of fire, electric shock and/or injury, observe the following: • Do not spill any type of liquid on the equipment. •..

• Page 6: About Your Security System

  1. About Your Security System Read this manual carefully and have your installer instruct you on your system's operation and on which features have been implemented in your system. All users of this system should be fully instructed in its use. Fill out the “System Information” page with all of your zone information and access codes, and store this manual in a safe place for future reference.

• Page 7: Keypad Controls & Indicators

  2. Keypad Controls & Indicators < > indicates user can scroll through options LED Indicators 2x16 LCD Ready Armed Trouble System is Power Ready to Arm <> Scroll Keys Function Keys: Stay Dual Action Keys: Away Fire Chime Auxiliary Bypass Zones Panic Quick Exit Select Option..

• Page 8: Night Arming

  4.2 Night Arming To night arm the system when it has been armed in Stay mode, press [ ][1] at the keypad. All inte-  rior zones will now be armed except for devices programmed as Night zones. NOTE: Your installer can also program a function key on the keypad that allows you to arm the system in Night mode.

• Page 9: Remote Arming And Disarming

  Disarming Error If your code is invalid, the system will not disarm and a 2-second error tone will sound. If this hap- pens, press [#] and try again. 4.8 Remote Arming and Disarming The system can be armed and/or disarmed, if programmed by the installer, using a remote control device (wireless key).

• Page 10: Time & Date Programming And Temperature Display

  8. Time & Date Programming and Temperature Display Press [ ][6] then enter your master access code to enter User  HH:MM MM/DD/YY Functions. Use the [<][>] buttons to find the menu option, then press [ ] to select. Enter the time in 24-hr. format (HH:MM), fol- ..

• Page 11: Trouble Conditions

  NOTE: If an access code is required to enter bypassing, only the master code and codes with Supervisory enabled can set the Bypass Group. To select a Bypass Group when arming the system: 1. Press [ ][1], then your access code. ..

• Page 12: Access Code Programming

  13. Access Code Programming In addition to the master code, you can program up to 16 additional user access codes. To program User Access Codes: 1. Disarm your system, if it is armed. 2. Press [ ][5][Master Access Code (i.e., 4- or 6-digit code)]; the armed ( ) indicator will turn on. ..

• Page 13: Zone Bypassing Attribute

  Next, scroll [<][>] to the attribute you want to program and press [ ] (or enter the attribute #) to  enable/disable the attribute. # Attribute Attribute 1 Supervisor Code 5-6 For Future Use 2 Duress Code Bell/Siren Squawk upon Away Arming/Disarming 3 Zone Bypassing Enabled One-Time Use Code 4 Phone Access..

• Page 14: User Function Commands

  NOTE: User 40 for the master code cannot be deleted; an attempt to delete this user code will delete the prox tag only. The prox tag must be re-enrolled before it can be used again. Proximity Tag Operation 6. Place the prox tag near the tag reader at the left side of the display to arm/disarm your sys- tem.

• Page 15: Changing The Buzzer Level

  15.2 Changing the Buzzer Level When this option is selected, the keypad will allow you to scroll through 21 different buzzer levels. A level of 00 disables the buzzer. 1. Press [ ][6] [Master Code].  2. Use the [<][>] buttons to scroll to Buzzer Control, then press [ ] to select.

• Page 16: Sms (short Message Service) Notification

  [9] Late-to-Open Enable/Disable The Late to Open feature enables or disables the Late to Open time programmed in [0]. It is typically used to track children after school. For example, if the parents get home from work at 5pm, and a child gets home at 4 p.m. The programmable timer could be set for 4:15 p.m. If the sys- tem is not disarmed at this time an alert would be sent to the monitoring station.

• Page 17: On-board Lcd Display Sms Messages

  2. Compose an SMS message that consists of the function text, a space, and your 4-digit or 6-digit access code (e.g., Stay Arm 2234) then send it to your panel’s cellular phone number. 3. The panel matches the incoming phone number to one of the phone numbers in its SMS Phone number list.

• Page 18: Buzzer

  19.3 Buzzer Provides an audible confirmation of a pressed button or that a command to the panel has been executed. 19.4 Keylock Mode Ensures that the system is not accidently armed or disarmed by the wireless key. To lock the keys: 1.

• Page 19: Walk Test

  20.2 Walk Test Walk Test mode allows you to test the operation of each detector in the system. While in Walk Test mode, the Ready, Armed, and Trouble LED's will flash to indicate that the Walk Test is active. The Walk Test can be terminated at anytime by re-entering [ ][6] [Master Code][8] on the keypad.

• Page 20: Access Codes

  21.1 Access Codes  Master Code [40]: ______________________ Proximity Tag: Wireless Prox Wireless Prox Code Access Code Code Access Code                     ..

• Page 21: Keypad Quick Guide

  22. Keypad Quick Guide The following table summarizes the keys, indicators, and most often used commands of the keypad. Keypad Keys, Indicators, and Commands Status Lights Ready - Must be on to arm system. All zones must be secured or bypassed and the system dis- armed for this light to activate.

• Page 22: Guidelines For Locating Smoke & Co Detectors

  Keypad Keys, Indicators, and Commands (Continued) Program User Codes Press [<][>]buttons to scroll to user code. Enter Change Attributes [Master Code][9][xx] to enter the user code (xx = 1-16). [1] Supervisor’s Code [2] Duress Code [3] Zone Bypassing [4] Remote Access [5]-[6] Future Use [7] Bell/Siren Squawk Output [8] One Time Use Code..
• Page 23 Smoke detectors should always be installed in USA in accordance with Chapter 11 of NFPA 72, the National Fire Alarm Code: 11.5.1.1 Where required by applicable laws, codes, or standards for a specific type of occupancy, approved single- and multiple-station smoke alarms shall be installed as follows: (1) In all sleeping rooms and guest rooms.

• Page 24: Household Fire Safety Audit

  24. Household Fire Safety Audit Read this section carefully for important information about fire safety. Most fires occur in the home. To minimize this danger, we recommend that a household fire safety audit be conducted and a fire escape plan be developed. 1.
• Page 25 If You do not 6. ARBITRATION - All disputes arising in connection with this agree to the terms of this EULA, DSC is unwilling to license the SOFT- Agreement shall be determined by final and binding arbitration in WARE PRODUCT to You, and You have no right to use it.

• Page 26: Warning Please Read Carefully

  WARNING Please Read Carefully • N o te t o In s ta l l er s Motion Detectors This warning contains vital information. As the only individual in con- Motion detectors can only detect motion within the designated areas as tact with system users, it is your responsibility to bring each item in this shown in their respective installation instructions.
• Page 28 © 2011 Tyco International Ltd. and its Respective Companies. All Rights Reserved. Toronto, Canada • www.dsc.com • Printed in Canada The trademarks, logos, and service marks displayed on this document are registered in the United States [or other countries]. Any misuse of the trademarks is strictly prohibited and Tyco International Ltd.